
Vacuum membrane press videos
Vacuum membrane press videos
Featured videos

Testing PVC and PET foil lamination
Watch the lamination trial with two foil materials and compare the resulting surfaces.
FacebookInstalling the RO66 and a vacuum press at Kral Mobilya
Installation and operator training for the RO66 CNC router and the vacuum press at Kral Mobilya’s workshop in İzmir.
FacebookGrooved cabinet fronts from Osman’s workshop
Osman at DEOS Kapak in Şanlıurfa shows his patterned cabinet fronts after pressing. Look closely at how the foil follows the grooves and wraps around the edges.
YouTubeLaminating an 18 mm door face with a glazing aperture
At the workshop in Afyonkarahisar, an 18 mm door face with an opening for glass is laminated on the vacuum press.
YouTubeNatural wood veneering in Georgia
During training at AIKO in Tbilisi, natural wood veneer is pressed onto a workpiece using the Heat Shape Master.
Foil lamination
YouTubeMembrane-pressed cabinet fronts at DEOS Kapak
A short film from the DEOS workshop in Şanlıurfa shows a selection of the cabinet fronts produced on its membrane press.
YouTubePVC foil lamination at DEOS Kapak
DEOS shows cabinet fronts faced with PVC foil at its workshop in Şanlıurfa.
YouTubeInside the DEOS Mobilya & Tasarım workshop
The DEOS team in Şanlıurfa shares another example of cabinet fronts made on its vacuum membrane press.
YouTubeFirst PVC foil pressing at Zade Ahşap
After installation in Kayseri, the Zade Ahşap team runs its first PVC foil lamination job.
YouTubeAn earlier-generation vacuum press at work in İzmir
A customer in İzmir shares a lamination job carried out on an earlier Makser vacuum membrane press.
YouTubePVC foil lamination in the İzmir workshop
A second film from the workshop shows a foil lamination run on the vacuum press.
YouTubeWrapping kitchen cabinet fronts with PVC foil
A workshop demonstration of kitchen cabinet fronts being faced with PVC foil on a vacuum membrane press.
YouTubePVC foil lamination at Sırrı Kapak
The Sırrı Kapak workshop in Şanlıurfa shows the surfaces of its cabinet fronts after PVC foil lamination.
FacebookFinished cabinet front samples at Makser
A closer look at the patterns and finishes of the cabinet fronts displayed in the office, followed by a view of the factory assembly area.
FacebookPVC foil wrapping in İlham’s workshop
İlham at Ergün Orman Ürünleri shows the grooved surface of a cabinet front after foil pressing.
FacebookPVC foil lamination from a customer in Pakistan
A Pakistani customer shares the result of a PVC foil pressing job on a Makser vacuum membrane press.
FacebookPVC cabinet fronts from Viviera in Salihli
The Viviera team in Salihli, Manisa, shares cabinet fronts wrapped in PVC foil on its vacuum membrane press.
Moulded and integrated-handle fronts
YouTubeWrapping a moulded cabinet front at DEOS
Osman’s footage shows how PVC foil wraps around the raised mouldings on an MDF cabinet front.
YouTubeIntegrated-handle cabinet fronts at DEOS
A cabinet front from DEOS in Şanlıurfa shows how the foil follows the recessed handle machined into the face.
YouTubePressing cabinet fronts with integrated handles
The foil covers the cabinet face and continues into the handle recessed into the panel.
FacebookPressing an integrated-handle front during training
Operators at the customer’s workshop practise wrapping a cabinet front with a recessed handle.
Door faces and glazing apertures
YouTubeLaminating a door face at Bağcı Kapı Sistemleri
A facing panel for a steel door is wrapped in PVC foil on the vacuum membrane press.
YouTubeWrapping panels with glazing apertures
The selection includes panels made to take a glass insert. See the wrap around the edges of the opening.
FacebookFirst door faces on the WP4 at Şafak Kapı in Sivas
Footage from the first door face lamination trial after commissioning the WP4 vacuum membrane press.

Laminating doors and cabinet fronts with the WP2
See how the twin-table vacuum membrane press fits into door and cabinet front production.
Spray adhesive application
YouTubeFrom spray adhesive to foil lamination in Çankırı
During commissioning at Ergün Orman Ürünleri, the team sprays adhesive onto the cabinet fronts before pressing them with PVC foil.
YouTubeApplying adhesive to an integrated-handle front at DEOS
Follow the work from spraying the face with adhesive to pressing the foil into the handle recess.
YouTubeSpray adhesive and cabinet front wrapping in Ankara
The team applies adhesive to the fronts, then uses the vacuum press to wrap them in foil.
Veneering and forming
YouTubeWrapping door faces and cabinet fronts on the Heat Shape Master
At AIKO’s workshop in Tbilisi, the Heat Shape Master is used to laminate door faces and cabinet fronts with PVC foil.
FacebookNatural wood veneering with a silicone membrane
Under vacuum, the silicone membrane presses the thin wood veneer against the surface of the part.
YouTubeBending plywood with the Heat Shape Master
Adhesive is applied between the layers. The stack is pressed over a mould under vacuum to form a curved part.
YouTubeForming acrylic on the Heat Shape Master
A heated acrylic sheet becomes pliable and takes the shape of the mould under vacuum.
Installation and training
YouTubeInstalling a second vacuum press and training the operators
A customer chose Makser again for a second vacuum membrane press. This film follows the installation and operator training in the workshop.
YouTubeFirst cabinet fronts and operator training in Mardin
After installation at Hamza Şermet’s workshop, the operators use the press to laminate cabinet fronts during training.
YouTubeFirst cabinet fronts after installation in Edirne
Cabinet fronts are laminated with foil during the first pressing test on the newly installed machine.
FacebookA second vacuum press for Modüler Dünyası in Kayseri
The handover and operator training for the customer’s second Makser vacuum membrane press.
FacebookThe first laminated fronts at AK Mobilya in Malatya
Arif and his team show the first PVC-wrapped fronts after installation and testing.
FacebookLaminating cabinet fronts during operator training
After installation, operators practise wrapping cabinet fronts on the vacuum membrane press.
From the factory and customer workshops
FacebookA closer look at the single-table WP1
A short factory film shows the working area of the WP1 vacuum membrane press and a cabinet front application.
FacebookA vacuum membrane press on a customer’s production floor
A customer shares footage of the vacuum membrane press during a production run in the workshop.
FacebookA press owner in Greece shares his experience
The owner talks about working with the Makser vacuum membrane press he bought in 2012.
FacebookA narrated pressing test on the factory floor
An 18 mm MDF cabinet front is used to test a press built for door faces. The team talks through the test as it runs.
Explore the vacuum membrane press models to find the right press for your application.
View machine detailsYeni video eklemek için bu metin bloğunda her satıra bir YouTube, Facebook video veya Instagram Reel bağlantısı koyun. Bu açıklama yayımlanan sayfada gösterilmez.