Vacuum Membrane Press WP1 OTM
MAKSERTEAM · WP1 OTM
One table.Vertical movement.Built for your workflow.
The WP1 vacuum membrane press combines a single worktable with a vertically moving heating unit for PVC foil lamination.
What can the WP1 vacuum membrane press do?
WP1 applies PVC foil to MDF surfaces. The optional silicone membrane also enables natural wood veneering and wood bending.
Applications include kitchen and bathroom cabinet doors, door faces and decorative panels. Machine selection should consider part dimensions, mould height and production workflow.
What are the main features of WP1?
WP1 combines a single worktable, vertical heating unit movement and equipment selected for the intended application.
Vertically Moving Heating Unit
The heating unit moves up and down using pneumatic cylinders with body size 80. A rack-and-pinion system maintains straight vertical travel.
Single Worktable
Loading, pressing and unloading take place on one worktable. Production planning depends on part dimensions and preparation time.
Water-Cooled Vacuum Pump
WP1 uses a water-cooled vacuum pump rated at 160 m³/h. Pump selection and application requirements are reviewed when preparing your quotation.
Infrared Temperature Measurement
An infrared sensor measures the material surface temperature. Heating settings depend on foil type, thickness and application conditions.
Delta PLC and Freestanding Panel
The Delta PLC control system uses a separate freestanding touchscreen operator panel beside the WP1. Validate settings for new materials through sample trials.
Optional Silicone Membrane
The optional silicone membrane system enables natural wood veneering and wood bending. The mould, adhesive and layer arrangement are selected for each application.
Pump, sensor and membrane photographs are illustrative images from the Makser product range. Supplied equipment and appearance may vary with the selected configuration.
How can MakserTeam help you choose a WP1?
MakserTeam can review the working area and equipment options based on your part dimensions, application and production requirements.
Selection for Your Application
Tell us whether you need PVC foil lamination, natural wood veneering or wood bending. We can review membrane, pump and cooling options together.
Installation and Training Planning
Layout, utility connections and operator training are considered alongside the delivery plan. Confirm the scope of installation and training in your quotation.
Technical Service and Spare Parts
Contact the Makser technical service team for service and spare parts enquiries. Include your machine model and serial number.
What do customers ask about WP1?
Table arrangement, heating unit movement and the silicone membrane option are key points to clarify when choosing a WP1.
Does the WP1 vacuum membrane press have a single table?
Yes. WP1 has one worktable for loading, pressing and unloading.
Does the WP1 heating unit move sideways?
No. The heating unit moves vertically using pneumatic cylinders with body size 80. A rack-and-pinion system maintains straight travel.
Is a silicone membrane required for PVC foil lamination?
No. A silicone membrane is not required for standard PVC foil lamination. Equipment selection depends on the intended application.
Can WP1 be used for natural wood veneering and wood bending?
Yes. These applications are possible with the silicone membrane system. Adhesive, mould, layer arrangement and part dimensions should be evaluated together.
Can WP1 accommodate every tall mould?
It depends. Mould height and part geometry must fit the available working clearance. Suitability is determined through a technical assessment.
Can a fixed daily cabinet door output be specified for WP1?
No. Daily output depends on part dimensions, loading arrangement, material and preparation time. Capacity should be assessed using your actual products.
Do WP1, WP2 and WP4 have the same table arrangement?
No. WP1 has one table and a vertically moving heating unit. WP2 has two tables and WP4 has three, with sideways heating unit movement.
Can WP1 be manufactured with custom dimensions?
Yes. Working area and dimensions can be adapted to customer requirements following a technical assessment.
How are machine dimensions and layout determined?
The working area is selected by considering part dimensions and mould height together. Allow space around the machine for loading and service access.
Dimensions may vary by project. For layout advice and a technical drawing, send MakserTeam your largest part dimensions and available floor space.
What are the technical specifications of WP1?
WP1 features a single worktable, a pneumatic vertical motion system and Delta PLC control with a separate freestanding touchscreen operator panel.
| Specification | Details |
|---|---|
| Number of Worktables | 1 |
| Worktable – External Dimensions | 1400 × 3100 mm |
| Worktable – Internal Dimensions | 1250 × 2950 mm |
| Heating System | 380 V / 1200 W infrared heaters |
| Vacuum System | 160 m³/h water-cooled vacuum pump |
| Temperature Sensor | Infrared sensor for material surface temperature |
| Operating Air Pressure | 6–8 bar; clean, dry compressed air |
| PVC Foil Loading Unit | Bearing-supported foil unwinding system with capacity for 4 rolls |
| Control System | Delta PLC with a separate freestanding touchscreen operator panel beside the machine |
| Electrical and Electronic Components | Schneider components and heat-resistant cables |
| Heating Unit Travel | Vertical: up and down |
| Heating Unit Motion System | Pneumatic cylinders with body size 80; rack-and-pinion system for straight vertical travel |
| Cycle Time | Varies with material, part geometry and processing settings. |
| Weight | Standard catalogue reference: 1250 kg. May vary by project and equipment configuration. |
| Total Installed Power | 34 kW |
| Applications | PVC foil lamination; natural wood veneering and wood bending with the optional silicone membrane |
| Machine Feet | Adjustable feet |
| Single-Part / Small-Batch Production | Supported through a separator arrangement |
| Silicone Membrane System | Optional; for natural wood veneering and wood bending |
| Alternative Vacuum Pump | Optional; 100 m³/h Italian oil-lubricated vacuum pump |
| Cooling System | Optional fan cooling system |
Technical values are catalogue references and may vary by project and equipment configuration. Installed power does not indicate energy consumption per pressing cycle.
Which optional equipment is available?
A silicone membrane, alternative vacuum pump and fan cooling system can be selected according to your application requirements.
| Option | Details |
|---|---|
| Silicone Membrane System | For natural wood veneering and wood bending. |
| Italian Oil-Lubricated Vacuum Pump | Alternative vacuum pump rated at 100 m³/h. |
| Fan Cooling System | Helps the material surface cool after lamination. |
| Separator Arrangement | For organising the working area during single-part or small-batch production. |
What does WP1 look like from different angles?
These product images show the single worktable, heating unit and foil roll holders from different angles.
These images are product renders of the WP1 model. Click any image to open the full-size version in a new tab.
How can you request a WP1 quotation?
Request a quotation by sharing your part dimensions, materials and target production volume. We can determine the working area and equipment options together.
Other models: WP2 Vacuum Membrane Press · WP4 Vacuum Membrane Press